S-Plastic Thermocomp JF004L compound is based on Polyethersulfone (PES) containing glass fibers. Characteristics of this

Product Categories

Valox Plastic [1]
Ultem PEI Resin [197]
Cycoloy PC ABS [9]
Xenoy Resin [2]
Cycolac ABS [173]
Geloy Resin [110]
Colorcomp [20]
LNP Faradex [37]
S-Plastic Lubricomp [506]
LNP Stat Kon [308]
S-Plastic Thermocomp [705]
Plastic Resin Pellets Bulk [113]
Verton Plastic [106]

Shenzhen Samtion Chemical Co., Ltd

Contact Now

S-Plastic Thermocomp JF004L compound is based on Polyethersulfone (PES) containing glass fibers. Characteristics of this

Name: SPlastic Thermocomp JF004L compound is based on Polyethersulfone PES containing glass fibers Characteristics of this
Brand: S-Plastic Thermocomp
Price: 1 USD

China S-Plastic Thermocomp JF004L compound is based on Polyethersulfone (PES) containing glass fibers. Characteristics of this wholesale

Brand Name : S-Plastic Thermocomp

Model Number : JF004L

Certification : Datasheet，MSDS，ROHS，SGS，REACH，FDA，EU，UL，COC/COA ,please contact us

Place of Origin : ——

MOQ : 100KG

Price : *USD

Payment Terms : L/C, T/T, Western Union, MoneyGram

Supply Ability : To be negotiated

Delivery Time : To be negotiated

Packaging Details : 25KG/bag

Melt Volume Rate, MVR at 260°C/2.16 kg : ？？？

UL Recognized, 94HB Flame Class Rating (3) : ？？？

Contact Now

S-Plastics Thermocomp JF004L resin is based on Polyethersulfone (PES) containing glass fibers. Characteristics of this grade isLow Extractible

Property

MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 5 mm/min	98	MPa	ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min	98	MPa	ASTM D 638
Tensile Strain, yld, Type I, 5 mm/min	2.7	%	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min	2.9	%	ASTM D 638
Tensile Modulus, 50 mm/min	6360	MPa	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	152	MPa	ASTM D 790
Flexural Stress, brk, 1.3 mm/min, 50 mm span	152	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	6300	MPa	ASTM D 790
Tensile Stress, yield, 5 mm/min	94	MPa	ISO 527
Tensile Stress, break, 5 mm/min	93	MPa	ISO 527
Tensile Strain, yield, 5 mm/min	2.1	%	ISO 527
Tensile Strain, break, 5 mm/min	2.1	%	ISO 527
Tensile Modulus, 1 mm/min	6640	MPa	ISO 527
Flexural Stress	149	MPa	ISO 178
Flexural Stress, break, 2 mm/min	148	MPa	ISO 178
Flexural Modulus, 2 mm/min	6300	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, unnotched, 23°C	563	J/m	ASTM D 4812
Izod Impact, notched, 23°C	50	J/m	ASTM D 256
Multiaxial Impact	2	J	ISO 6603
Instrumented Impact Total Energy, 23°C	11	J	ASTM D 3763
Izod Impact, unnotched 80104 +23°C	32	kJ/m²	ISO 180/1U
Izod Impact, notched 80104 +23°C	5	kJ/m²	ISO 180/1A
THERMAL	Value	Unit	Standard
HDT, 0.45 MPa, 3.2 mm, unannealed	216	°C	ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed	211	°C	ASTM D 648
HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm	216	°C	ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm	210	°C	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.54	-	ASTM D 792
Density	1.53	g/cm³	ASTM D 792
Moisture Absorption, 50% RH, 24 hrs	0.37	%	ASTM D 570
Mold Shrinkage, flow, 24 hrs	0.3 - 0.6	%	ASTM D 955
Mold Shrinkage, xflow, 24 hrs	0.5 - 0.7	%	ASTM D 955
Moisture Absorption (23°C / 50% RH)	0.55	%	ISO 62
Source GMD, last updated:05/05/2008

Processing

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.

PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION

(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours
storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded
samples. All samples tested under ISO test standards are prepared according to ISO 294.

(2) Only typical data for selection purposes. Not to be used for part or tool design.

(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.

(4) Internal measurements according to UL standards.

Other related products we recommend:

For more information please download the datasheet
	S-Plastics Thermocomp JF004L.pdf

Get The Latest Quotation

First-level distribution source in South China

Reduce procurement costs, improve supply stability,

Help you find the most suitable engineering plastic materials

Click to consult and get the latest quotation within 24 hours!

S-Plastic Thermocomp JF004L compound is based on Polyethersulfone (PES) containing glass fibers. Characteristics of this